Williamh85 wrote:Do not follow that guide. That says to put your rotuer in bridge mode.
It does NOT say that.
That FAQ describes connecting the user router in a LAN-to-LAN configuration with the user router as a WAP. Although slightly more complicated, a LAN-to-LAN configuration has fewer drawbacks than the LAN-to-WAN configuration you describe. Drawbacks include creating two separate subnets and causing the devices on the second router to be double NAT'ed.
You also fail to point out that in the LAN-to-WAN configuration, the second router MUST have a different subnet address from the Actiontec.
You suggest buying the GEN3 router, but you also fail to point out that the GEN3 router does NOT support 5Ghz, which the OP indicated was a requirement,.
Williamh85 wrote:U can buy a Gen3 router from verizon BUT we only support 1 rotuer,
Are you speaking in an official VZ capacity?