Quantcast
Channel: All Fios Internet posts
Viewing all articles
Browse latest Browse all 39554

Re: Airave (AirrRave?) Sprint Port opening

$
0
0

kdhughes wrote:

I have the Sprint AirRave signal booster and it has stopped working. Sprint tells me I need to "open" the following ports for the device to work, but told me to ask Verizon how to do it:

53   67   68   500   4500

 

How do I do this with the Actiontec Router?

 

Thanks!


Kind of odd that it would work and then stop possibly the rules got set up but on a dhcp assigned address.

You really need a static address for port forwarding to work though it will work with device assigned name if you know it

 

 

Logon to the router

select firewall settings

select port forwarding

build the firewall rule/s as below

scroll down lisr and select new entry

key in the ip address of the device (this will be the address of the wan port of the device on the 192.168.1 subnet(the VZ router subnet)

set protocol to user defined

key in application name e.g AireRave53

in the new server ports select the green + sign

Select TCP (presumably, Sprint should tell you that)

leave source port as any

set destination port single

key 53 into the port number box that appears

select ok

repeat add application for ports 67,68,500,4500 note for 67 and 68 you can set them as a range rather than single

when all port added say ok

Your port forwarding rule should now show in the list

ensure there is a check mark to make it active

 


Viewing all articles
Browse latest Browse all 39554

Trending Articles