Re: Connect Router Via Coax Instead of Ethernet

---

BigPete82 wrote:

Where would the adapter be located if I have one?  Between the ONT and router?  If so I don't have one.  I'm pretty sure the Actiontec Rev E and F supports MoCA.

---

 

It does, but if you are Ethernet provisioned, then you will not have the VOD and Guide.   You haven't commented on this.

Also you haven't really indicated  what you have with respect to equipment, wiring layout, subscribed services, etc.  I'm sure you're aware that I'm a regular user like you, so I haven't access to what services you have.  That means that without further details on your specifics, I'm reduced to speculating.

Here's a good general description of Ethernet and coax WAS systems:

http://www.dslreports.com/faq/16753

Here is a typical layout submitted by another user:

http://www.lakekiowatx.com/document/24463269verizon_fios_actiontec.pdf?10090

You may also find something that looks like your system and layout among these images:

https://www.google.com/#output=search&sclient=psy-ab&q=fios%20wiring%20diagram&oq=&gs_l=&pbx=1&bav=on.2,or.r_cp.r_qf.&bvm=bv.47883778,d.dmg&fp=29bb23d9db2953ff&biw=1194&bih=683&pf=p&pdl=300