Acutally I just came across this link, which I think explains what I need to do as item 2:
http://www.dslreports.com/faq/15984
My only question is, when starting the process and performing the following:
2.1) You will need to reconfigure the remote router, BEFORE you connect it to the coax.
- Perform a hard reset on the Actiontec to restore factory defaults.
- Connect a PC to a LAN port of the Actiontec.
By default, DHCP server should be enabled on the Actiontec, so no need to set a static IP address on the PC. - Login to the router at 192.168.1.1
How do I connect the pirmary and secondary actiontec? Do I disconnect the primary and plug the secondary into coax and do all this, and then when finished plug the primary back in? Or, do i Ieave the primary plugged in the whole time?
Thanks,
BT